MOTUL 8100 X-clean 5W-40, 1 L

Gasoline & Diesel lubricant - EURO IV and V

100% Synthetic 


High performance 100% synthetic lubricant approved by many car manufacturers. 

Specially designed for last generation cars, powered by turbo Diesel direct injection or Gasoline 

engines, EURO IV or EURO V emission regulation compliant, requiring an ACEA C3 engine oil i.e. 

high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of suphated ash (≤ 0.8%), 

phosphorus (0.07 ≤ x ≤ 0.09%) and sulphur (≤ 0.3%). 

Compatible with catalytic converters and Diesel Particulate Filters (DPF).

Suitable also for any type of Diesel or Gasoline engines calling for ACEA A3/B3 or A3/B4 lubricant.

Before use always refer to the owner manual or handbook of the vehicle. 




 Ford WSS M2C 917A

MB-Approval 229.51

 Porsche A40

 Renault RN0700 under N° RN0700-08-018

 Renault RN0710 under N° RN0710-08-012 

 VW 502 00 – 505 00 – 505 01



Engines compliant with EURO IV and EURO V emission regulation are fitted with sensitive exhaust 

gas after treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converters operation 

leading to inefficient exhaust gas treatment; and Sulfated Ashes clog DPFs leading to shorten 

regenerating cycle, quick oil aging, higher fuel consumption and engine power loss. 

The ACEA C3 standard requests from the lubricant significant oil film resistance and low emission 

performance for powerful engines : MOTUL 8100 X-clean 5W-40 has synthetic base stocks and 

dedicated SAPS levels that generates outstanding oil film resistance, reduces friction in the engine 

and provides after treatment devices compatibility. MOTUL 8100 X-clean 5W-40 brings high 

lubricating properties such as wear protection and high temperature resistance for better controlled oil 

consumption. ACEA C3 lubricants achieve extended drain intervals managed by vehicles on-board 



SSANGYONG,… recommend an ACEA C3 lubricant for most of their vehicles especially Diesels with 


The BMW Long Life-04 specification imposes severe constraints to the lubricant particularly due to 

Valvetronic and after treatment systems compatibility. It covers all BMW engines from 2004 and also 

all BMW engines before 2004 as BMW LL-04 covers all the previous BMW specifications such as 

BMW LL-98 and BMW LL-01. 

ATTENTION : BMW LL-04 product can be used for gasoline engines only in European Union 

countries, Switzerland, Norway and Liechtenstein. Outside those countries, a BMW LL-01 lubricant 

such as MOTUL 8100 X-cess 5W-40 is required. Refer to BMW recommendation. We retain the right to modify the general characteristics of our products in order to offer to our customers the latest technical development 

Product specifications are definitive from the order which is subject to our general conditions of sale and warranty. Made in FRANCE

MOTUL - 119 Bd Félix Faure - 93303 AUBERVILLIERS CEDEX - BP 94 – Tel : 33 1 48 11 70 00 – Fax : 33 1 48 33 28 79 – Web Site: www.motul.fr 08/10

The FORD WSS M2C 917A standard is required for FORD Galaxy 1.9L TDI until MY2006 ; and for 

FORD Ka 1.2L Duratec and 1.3L Duratorq TDCi from MY2008. 

The MB 229.51 requires among many other severe constrains from the lubricant a reduced content of 

Sulfted Ash, Phosphorus and Sulphur in order to be compatible with MERCEDES exhaust gas after 

treatment systems. The specification MB 229.51 applies to some MERCEDES Gasoline engines, and 

to all MERCEDES Diesel engines, with or without DPF. 

The Porsche A40 standard requires extreme high shear resistance from the lubricant. This 

specification applies to all PORSCHE engines, except Cayenne V6 and Diesel versions (for these 

specific engines, use an approved Porsche C30 lubricant such as MOTUL 8100 X-clean+ 5W-30). 

RENAULT has developed RN0700 and RN0710 standards for oils able to endure the most severe 

thermal constrains along with modern after treatment systems compatibility. 

The Renault RN0700 standard applies to all Naturally Aspirated Gasoline engines (except Renault 

Sport) of RENAULT Group (Renault, Dacia, Samsung). 

The RN0700 specification applies also to all RENAULT Diesel cars fitted with 1.5L dCi engines 

without DPF (Diesel Particulate Filter) having less than 100 hp output and 20 000 km or 1 year oil 

drain interval. 

The Renault RN0710 standard applies to all Turbocharged Gasoline, Renault Sport and Diesel 

without DPF engines of RENAULT Group (Renault, Dacia, Samsung). 

The RN0710 specification does not apply to RENAULT Diesel cars fitted with 1.5L dCi engines 

without DPF having less than 100 hp output and 20 000 km or 1 year oil drain interval which 

specifically require a RN0700 lubricant. For the 2,2L dCi with DPF, use only an approved RN0710 

lubricant, not a RN0720. 

Specifications VW 502 00 and VW 505 01 require outstanding detergent/dispersant power, high oil 

film resistance and better viscosity increase resistance due to soot in order to cover many Gasoline 

engines and most of Direct Injection Diesel engines (unit injector system, fixed oil drain interval, check 

owner’s manual). Attention, do not use MOTUL 8100 X-clean 5W-40 when a VW 504 00 or VW 507 

00 lubricant is required, in that case use MOTUL SPECIFIC 504 00 507 00 5W-30 or MOTUL 8100 Xclean+ 5W-30. 

The FIAT 9.55535-S2 performance level imposes the engine oil to combine both ACEA C3 standard 

and 5W-40 viscosity grade in order to perfectly lubricate all Gasoline engines of FIAT, ALFA-ROMEO, 

and LANCIA produced from July 2007. 


Drain interval : according to manufacturers’ recommendations and tuned to your own use. 

Do not mix with lubricants not ACEA C3 compliant. 

Before use always refer to the owner manual or handbook of the vehicle. 


Viscosity grade SAE J 300 5W-40

Density at 20°C (68°F) ASTM D1298 0.845 

Viscosity at 40°C (104°F) ASTM D445 84.7 mm²/s 

Viscosity at 100°C (212°F) ASTM D445 14.1 mm²/s 

Viscosity HTHS at 150°C (302°F) ASTM D4741 3.64 mPa.s 

Viscosity index ASTM D2270 172 

Pour point ASTM D97 -39°C / -38.2°F 

Flash point ASTM D92 234°C / 453.2°F 

Sulfated ash ASTM D874 0.80% weight 

TBN ASTM D2896 7.5 mg KOH/g

Toode on müügil kaupluses "MÄÄRDEKESKUS"